Your GS-911wifi functionality
Connecting to your GS-911wifi
Your GS-911wifi comes with both USB and Wifi. The GS-911 Windows PC software can be used over either the USB or Wifi connection. The Windows PC software has the the full functionality for every model that is supported by GS-911.
If you are on the road, no where near your home/office/garage wifi, you can connect your mobile device (could be any phone, tablet, iPad etc.), to your GS-911wifi device, using the GS-911's built in soft Access Point, or as we refer to it "Device-to-Device" (D2D) mode. Simply scan for a wifi network that starts with GS-911... and connect to it - it's that simple!
Note: When using D2D mode you only have access to the embedded EMERGENCY Functionality - see above definitions.
Using any device with a html 5 browser and wifi (Android phone/tablet, iPhone/iPad, MAC, etc.), that also has internet access, you are able to connect to the HEX CLOUD. This gives you SERVICE functionality that was previously limited to the Windows PC version. Be sure to keep an eye on this evolving functionality!
where: 
Windows PC/Laptop, 
Wifi Router/AccessPoint, 
Any device with a Browser and Wifi
Specifications:
| Software | GS-911 Windows PC software GS-911wifi mobile app (iOS and Android) On-board GS-911wifi web interface (using any HTML5 web browser) |
| On-Board File Storage | 4GB or 8GB |
| Connection | USB or WiFi |
| USB Connector | B-Type (cable supplied) |
| Power Supply | USB and/or 12V from 10-pin connector |
| WiFi Compatibility | 802.11b/g 2.4GHz channels 1 to 11 |
| WiFi Range | Within the same room (less than 10 meter) |
| WiFi Modes | Infrastructure and D2D SoftAP (channel 6) |
| WiFi Security Options | None/WEP/WPA/WPA2 |
FOR THE LATEST MODEL COVERAGE, REFER TO THE FUNCTION CHART, SINCE NEW MODELS ARE ADDED CONTINUOUSLY.
The GS-911wifi covers ALL the same models covered by the first generation GS-911usb.
Additionally, the following models are also covered by the GS-911wifi
){kind=link}