R&G Tail Tidy for Triumph Daytona 660 ’24-

12,000.00

DETAILS: R&G Tail Tidies
– Tail Tidy for Triumph Daytona 660 ’24-
Product Code(s): LP0381BK

Report Abuse
SKU: LP0381BK Category: Tag:
Description
ABOUT THESE R&G TAIL TIDIES
R&G is a leading supplier of Tail Tidies and bolt-on accessories.

Radically tidy up the rear end of the Triumph Daytona 660 ’24- with this Tail Tidy. This Tail Tidy kit has everything you need to replace the obtrusive OEM license plate holder with a sleek, modern unit.

 

WHAT ARE R&G TAIL TIDIES?
Why R&G Tail Tidies are a must have for your .

 

As used by Performance Bikes, Fast Bikes, Superbike Magazine and MCN to name but a few. The R&G Licence Plate Holder has been designed to replace the very large, original plastic licence plate holder and improve the lines of the modern machine. The licence plate holder comes with all necessary holes drilled and all the fixtures and fitting you may need. Where necessary, the Tail Tidy comes with a neat little built-in licence plate light.

Shipping
Reviews (0)
0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “R&G Tail Tidy for Triumph Daytona 660 ’24-”

Your email address will not be published. Required fields are marked *

Questions & Answers
Loading...
More Products

R&G Tail Tidy for Suzuki Hayabusa ’21-

14,500.00
DETAILS: R&G Tail Tidies
- Tail Tidy for Suzuki Hayabusa '21-
Product Code(s): LP0309BK

Eazi-Grip BMW R1200GS RALLYE 2017-2018 Black Tank Grips

Please note Eazi-Grip™ Black Tank Grips come with a 25mm diameter Eazi-Grip™ logo badge that should be placed in the hole in the grip once applied (not applicable for PPF). **Each kit contains tank grips or protection film for both the right and left side of the tank and will have a minimum of 2 pieces per kit that are specific to the bike model. Centre tank pads contain one tank pad per kit.  Images are for illustrative purposes only, the tank grips may be larger/smaller than in the picture and are only designed to show the correct location of tank grips on the bike.**

Barkbusters Hardware Kit – Two Point Mount (BHG-055)

11,200.00

Hardware Kit

To fit: APRILIA SHIVER ('13) BMW F700GS ('16 on) BMW F800GS ('16-'23) BMW F800GSA ('16 on) HONDA CB125E HONDA CB500F ('13-'18) HONDA CB500X ('16-'18) HONDA CB650F HONDA CB650R ('19 on) KTM 200 DUKE ('13 on) KTM 390 DUKE ('13-'16) SUZUKI SFV650 GLADIUS ('09)

Code: BHG-055-BK

Evotech Radiator & Oil Cooler Guard Set – Kawasaki Ninja ZX-10R

19,500.00
What protection does an EP motorcycle radiator & Oil Cooler Guard Set give? An EP radiator guard protects the Kawasaki Ninja ZX-10R 40th Anniversary Edition radiator from damage while allowing cooling air to pass through - and look good at the same time. A radiator's delicate cooling fins easily bend, and misaligned fins can cause overheating. The radiator's internal cores can also be holed by stones, etc; all usually picked up and flung directly into the radiator from the bike's front tyre or from other traffic. Leaking coolant will make the motorbike inoperable because of overheating, which can result in engine damage.   This product is protected under the following registered design rights. EU Reg. Design: 008654792-0007 UK Reg. Design: 6148296

R&G Tail Tidy for Kawasaki Ninja ZX-10R, ZX-10RR ’21- ’24

15,000.00
DETAILS: R&G Tail Tidy
- Tail Tidy for Kawasaki Ninja ZX-10R, ZX-10RR '21- '24
Product Code(s): LP0306BK

MOTOREX FOUR STROKE 4T 10W/40 1Ltr

899.00
SKU:  306241 Categories:  Lubricants and Cleaners, Motorex 3601-0593 UPC:  7611197126980 Brand:  Motorex
Product Enquiry

Product Enquiry

RELATED PRODUCTS