Oxford Oximiser Pro 2000 UK

12,000.00

The Oxford Oximiser Pro 2000 charges a range of 12V batteries at a maximum charge rate of 2000mA (2Amps). The intelligent 8-stage automatic program ensures that every battery is correctly and safely charged to its optimum voltage before switching into maintain mode – extending the life of the battery.

Report Abuse
SKU: EL203 Category: Tags: ,
Description

Oximiser Pro is a range of professional battery optimisers designed to automatically charge, maintain and optimise your battery.

The Oxford Oximiser Pro 2000 charges a range of 12V batteries at a maximum charge rate of 2000mA (2Amps). The intelligent 8-stage automatic program ensures that every battery is correctly and safely charged to its optimum voltage before switching into maintain mode – extending the life of the battery.

Compatible with WET/MF, AGM, GEL and LiFePO4 batteries, each charging program is tailored to the selected battery type. A desulfation stage repairs damaged batteries automatically during the charging profile, bringing them back to life (not LiFePO4).

Suitable for use in any environment, the Oximiser Pro’s high impact, fire resistant ABS casing is ultrasonically sealed to achieve an IP65 rating. The clear, easy-to-read LCD display assists the user throughout the charging stages and if required, the charger can be lifted off the ground by clipping on a removable hanger.

The Oximiser Pro includes a set of cleverly designed 2-in-1 Croc-O-Ring leads, where each ring lead securely clips into a crocodile clip saving the need for two separate wiring harnesses and connects to the battery charger via an SAE connector.

Key Features
• Weatherproof IP65 rated – indoor and outdoor use
• 8 stage automatic charging: polarity test, analyse, desulfation (12V WET/MF, AGM, GEL), soft start mode, bulk mode, absorption mode, voltage check, maintain mode (float voltage)
• AH Capacity: 8AH – 80AH
• Compatible with: 12V WET/MF, AGM, GEL and LiFePO4 batteries
• Max output 2000mA
• LCD display: clear and easy to read battery charging information
• High impact, fire resistant ABS casing
• Rear fitted rubber feet for increased ventilation around the Oximiser casing
• Waterproof cable exit with cable strain relief
• Winter-grade cable
• Removable hanger: easy to use, clip in and turn to hold the hanger in place
• Includes set of Croc-O-Ring leads

Shipping
Reviews (0)
0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “Oxford Oximiser Pro 2000 UK”

Your email address will not be published. Required fields are marked *

Questions & Answers
Loading...
More Products

Barkbusters EGO Handguard – with Multi Fit Clamps – RED

10,600.00

Barkbusters EGO Handguard - with Multi Fit Clamps TO FIT: Tapered handlebar NOTE: will not fit Renthal Twin Wall or Barkbusters VSBar

Code: EGO-205-RD

R&G Brake Lever Guard for Kawasaki Ninja ZX-10R, ZX-10RR ’21- ’24

6,000.00
DETAILS: R&G Lever Guards
- R&G Brake Lever Guard for Kawasaki Ninja ZX-10R, ZX-10RR '21- '24
Product Code(s): BLG0039

Eazi-Grip BMW S1000RR 2019-2025 Black Tank Grips

5,000.00
Please note Eazi-Grip™ Black Tank Grips come with a 25mm diameter Eazi-Grip™ logo badge that should be placed in the hole in the grip once applied (not applicable for PPF). **Each kit contains tank grips or protection film for both the right and left side of the tank and will have a minimum of 2 pieces per kit that are specific to the bike model. Centre tank pads contain one tank pad per kit.  Images are for illustrative purposes only, the tank grips may be larger/smaller than in the picture and are only designed to show the correct location of tank grips on the bike.**

Evotech Front Spindle Bobbins – Ducati Streetfighter V4 S (2020 – 2024)

6,500.00
Offering protection to the front wheel spindle, lower front forks and brake calipers, EP Front Spindle Bobbins for the Ducati Streetfighter V4 S are discreet yet strong. The black bobbins sit tightly either side of the front spindle, held in place by a rolled-thread spindle rod. The durable materials of injection-moulded nylon and aluminium hope to be first to take impact should an incident occur.   Additionally, the nylon outers are able to twist with impact to reduce stress and wear on the wheel and bobbins.

Barkbusters Hardware Kit – Two Point Mount (BHG-069)

9,400.00

Hardware Kit

To fit: BMW G310GS ('17 on) BMW G310R ('16 on)

Code: BHG-069-NP

Barkbusters STORM Handguard – Single Point Bar End Mount (threaded) – BLACK

10,000.00

STORM Handguard - Single Point Bar End Mount (threaded)

TO FIT: 6mm or 8mm internal thread handlebar

Code: STM-007-BK

Product Enquiry

Product Enquiry

RELATED PRODUCTS