MOTOREX CHAINLUBE OFF ROAD

1,099.00

CHAINLUBE fully synthetic chain spray
  • centrifuge-resistant
  • water-resistant
  • thermostable

For Bikes

Model/Year

Report Abuse
SKU: 302381 Categories: , Tags: ,
Description

Description

Fully synthetic, wear-reducing chain and Bowden cable lubricant; O-ring and X-ring tested. Particularly suitable for cross-country, enduro and off-road driving. Centrifuge-, pressure- and water-resistant.

The new designs will be converted in the coming weeks. Depending on stock levels, it may take some time before they are delivered.

Product attributes

  • centrifuge-resistant
  • water-resistant
  • thermostable
  • wear-reducing effect
  • fully synthetic

Note

Best results are achieved when the chain has been warmed up before cleaning and lubrication. The old chain grease becomes less viscous in warm conditions, making it easier to clean using the CHAIN CLEAN DEGREASER. When lubricating, the effect of the warm chain is also clearly noticeable and CHAINLUBE OFF ROAD can get into the gaps more easily.

Dosage

Apply evenly to the inside of the chain. Our motto: less is more and it’s better to apply less more often than a lot in one go.

Package sizes

  • Spray 56 Milliliter
  • Spray 500 Milliliter
  • Carton 12 X 56 Milliliter
  • Carton 12 X 500 Milliliter

Application

Shake the spray can well before use. Spray the chain, cleaned with MOTOREX CHAIN CLEAN, and leave to work for several hours (ideally overnight).

Dosage

Apply evenly to the inside of the chain. Our motto: less is more and it’s better to apply less more often than a lot in one go.

Shipping
Reviews (0)
0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “MOTOREX CHAINLUBE OFF ROAD”

Your email address will not be published. Required fields are marked *

Questions & Answers
Loading...
More Products

Evotech Rear Spindle Bobbins – BMW R 1300 GS (2024+)

15,800.00
Projecting from the driveline side of the BMW R 1300 GS (2024+), the nylon bobbin head and aluminium centralising spacer protects the rear of the Cardan drive shaft casing, hub and wheel. Made from injection-moulded nylon, the bobbin head sits above an aluminium centralising spacer and revolves with the wheel to minimise impact damage on one area and reduce stress on the wheel. A machined and coated aluminium hub stop on the non-drive side complements the GS' stylish design. This product is protected under the following registered design rights. CODE- Rear Spindle Bobbins EU Reg. Design: 007800099-0019 UK Reg. Design: 9007800099-0019

Eazi-Grip BMW R 1300 GS 2023-2025 Black Tank Grips

5,000.00
Please note Eazi-Grip™ Black tank grips come with a 25mm diameter Eazi-Grip™ logo badge that should be placed in the hole in the grip once applied (not applicable for PPF). **Each kit contains tank grips or protection film for both the right and left side of the tank and will have a minimum of 2 pieces per kit that are specific to the bike model. Centre tank pads contain one tank pad per kit.  Images are for illustrative purposes only, the tank grips may be larger/smaller than in the picture and are only designed to show the correct location of tank grips on the bike.**

Evotech Rear Spindle Bobbins – Triumph Daytona 660 (2024+)

6,500.00
What is Spindle Bobbin Crash Protection?
Mounted through the rear wheel spindle and swing arm, the nylon bobbins and aluminium support of EP Rear Spindle Bobbins for the Triumph Daytona 660 offer secure crash protection. The bobbins project from both sides of the wheel, intending to take impact first, should an incident occur to, reduce expensive damage. The innovative design by Evotech Performance allows the nylon bobbins to rotate above the aluminium core which can reduce stress and wear placed on the wheel.

Evotech Rear Spindle Bobbins – BMW S 1000 XR (2024+)

6,500.00
Innovatively designed to protect the lower swing arm and brake calipers, EP Rear Spindle Bobbins for the S 1000 XR TE are crafted from high quality materials.   A robust nylon bobbin head sits over an aluminium core, fixed in place by a stainless steel spindle rod.   The nylon is free to move over the aluminium which can reduce stress on the wheel.

Quad Lock MAG Universal Adapter

2,000.00
Our Quad Lock® MAG Universal Adapter features our secure locking mechanism compatible with all twist, lock mounts and can be directly adhered to phones, cases and most flat metal or plastic surfaces.
Product Enquiry

Product Enquiry

RELATED PRODUCTS