SBS
Liqui Moly
Barkbusters
Vredestrein
Arrow Exhaust
Yausa
SC Project
CNC Racing
DNA
Chigee
Evotech
Eazi Grips
K&N
Healteach
Motografix
Motorex
NGK
PUIG
RLZ Carbon
STOPM
Brocks
R&G
Oils & Lubricants
Engine Oil
Bike
Car
Brake Fluid
Chain Lube
Gear Oil
Engine Ice Coolant
Boosters
Fork Oils
Fork Oil Seals
Air Filters
Tyres
Pirelli Tyres
Michelin Tyres
Chain Sprockets
DID
Exhaust
Aprilia
BMW
Benelli
Ducati
Honda
Harley Davidson
Kawasaki
Royal Enfeild
Suzuki
KTM
Triumph
Yamaha
Luggage
Panniers
Top Cases
Saddle Bags
Tank Bag
Lights & Mounts
Lights
Wiring Adapters & Mounts
Mounts
Quad Lock
Sensors
Tire Pressure Sensors
Batteries
Brake Pads
Oil Filter
Tank Pad
Hand Guard
Handlebar Grips
USB Charger
Cleaner
Triumph
Evotech Crash Protection Triumph Trident 660 Triple Tribute Edition (2024+)
₹38,500.00
Evotech Crash Protection for Triumph Trident 660 Triple Tribute Edition (2024+) enhances safety with precision-engineered crash bobbins and CNC-machined aluminum mounts. Crafted using high-performance polymer sliders, it delivers reliable protection against falls and slides while maintaining the bike’s aesthetic and agility.
Evotech Front Spindle Bobbins – Triumph Daytona 660 Trident 600 Street Triple 765
₹6,500.00
What is Spindle Bobbin Crash Protection?
Fitted through the front wheel fork of the Street Triple 765 RS, EP Front Spindle Bobbins offer crash protection for the forks, brake calipers and spindle retainers. Standing out from the front wheel, the nylon bobbin and aluminium inner will likely be the first to take impact in any incident. The nylon slider uses Evotech Performance's innovative design and is able to rotate on impact, reducing wear and damage.
Evotech Front Spindle Bobbins – Triumph Speed Triple 1200 RS (2025+)
₹6,500.00
What is Spindle Bobbin Crash Protection?
Evotech Performance recommends you defend the front end of the Speed Triple RS with EP Front Spindle Bobbins. Held through the wheel using a rolled-thread spindle, the nylon outer and aluminium inner should receive impact first in the unlikely event of a crash. With EP's innovative design, the nylon bobbin head can move on impact to decrease any stress on the wheel.
Evotech Pillion Footpeg Removal Kit – Triumph Street Triple 765 R (2023+)
₹6,500.00
Evotech Pillion Footpeg Removal Kit for Triumph Street Triple 765 R (2023+) enables a clean, solo-rider rear profile by removing passenger footpegs and mounts. CNC-machined billet aluminum components provide a lightweight, precise fit while maintaining structural rigidity and complementing the bike’s design.
Evotech Radiator Guard – Triumph Street Triple 765 Moto2 Edition (2023+)
₹11,800.00
How does an EP Radiator Guard help me?
Simply put, an EP Radiator Guard protects the Triumph Street Triple 765 Moto2 Edition radiator from damage caused by road debris (stones, mud, dropped waste etc), while at the same time allowing cool air to pass through. The radiator's thin, soft aluminium cooling fins easily bend, and misaligned fins can restrict cooling air, which can lead to overheating. The radiator's internal core is also susceptible to being holed by stones that can be picked up by the front tyre or other traffic and flung directly into the radiator. Leaking coolant will make the Triumph Street Triple 765 Moto2 Edition overheat, which, in turn, can lead to engine damage. This product is protected under the following registered design rights. UK Reg. Design:Â 6277821 EU Reg. Design:Â 015022767-0004
Evotech Radiator Guard – Triumph Tiger 900 (2020 – 2023)
₹14,900.00
What protection does an EP motorcycle radiator guard give?
An Evotech Radiator Guard protect the Triumph Tiger radiator system from damage caused by road and off-road debris, while allowing cooling air to pass through - and look good at the same time. A radiator's delicate cooling fins easily bend, and misaligned fins can cause overheating. The radiator's internal cooling galleries can also be holed by stones, which are usually picked up and flung directly into the radiator from the motorcycle's front tyre or passing traffic. Leaking coolant will make the Tiger 900 inoperable because of overheating, which can result in engine damage. This product is protected under the following registered design rights. EU Reg. Design: 008262380-0019 UK Reg. Design: 9008262380-0019
Evotech Radiator Guard – Triumph Tiger 900 Rally Pro (2024+)
₹14,900.00
Why should I choose an EP Radiator Guard?
Evotech Radiator Guards are designed by motorcycle-owning engineers who value quality and precision. The end result is that all EP components fit precisely and work perfectly at protecting the Triumph Tiger 900 Rally Pro dual-radiators from damage caused by road / off-road debris (stones, mud, dropped waste etc), while at the same time allowing cool air to pass through. The radiators' thin, soft aluminium cooling fins and internal cores are very susceptible to being hit or holed by debris that can be picked up by the front tyre or other traffic and flung directly into the radiators. Leaking coolant will make the Triumph Tiger 900 Rally Pro overheat, which, in turn, can lead to engine damage. This product is protected under the following registered design rights. EU Reg. Design: 008262380-0019 UK Reg. Design: 9008262380-0019
Evotech Radiator Guard – Triumph Tiger Sport 660 (2022+)
₹12,000.00
Why would a Triumph Tiger Sport 660 require a radiator guard?
Evotech radiator guards are designed to protect a motorcycle radiator from damage caused by road debris, while allowing essential cooling air to pass through. Regardless of engine capacity and overall performance, without a quality radiator guard in place the radiator cooling fins can get hammered and stone chippings, flung from the front tyre or passing traffic, can hole the radiator core. As a fragile and intricate component, the Tiger Sport 660 radiator is very difficult to repair (in most cases beyond economical repair) and expensive to replace. This product is protected under the following registered design rights. EU Reg. Design: 008934319-0002 UK Reg. Design: 6195550
Evotech Radiator Guard – Triumph Trident 660 Triple Tribute Edition (2024+)
₹12,000.00
Why would a Triumph Trident require a radiator guard?
EP radiator guards are designed to protect a motorcycle radiator from damage caused by road debris, while allowing essential cooling air to pass through. Regardless of engine capacity and overall performance, without a quality radiator guard in place the radiator cooling fins can get hammered and stone chippings, flung from the front tyre or passing traffic, can hole the radiator core. As a fragile and intricate component, the Trident radiator is very difficult to repair (in most cases beyond economical repair) and expensive to replace. This product is protected under the following registered design rights. EU Reg. Design:Â 008654792-0003 UK Reg. Design:Â 6148292
Evotech Radiator Guard (Black) – Triumph Speed Triple 1200 RS (2025+)
₹11,700.00
How does an Evotech Radiator Guard help me?
Simply put, an Evotech Radiator Guard protects the Triumph Speed Triple RS radiator from damage caused by road debris (stones, mud, dropped waste etc), while at the same time allowing cool air to pass through. The radiator's thin, soft aluminium cooling fins easily bend, and misaligned fins can restrict cooling air, which can lead to overheating. The radiator's internal core is also susceptible to being holed by stones that can be picked up by the front tyre or other traffic and flung directly into the radiator. Leaking coolant will make the Triumph Speed Triple RS overheat, which, in turn, can lead to engine damage. This product is protected under the following registered design rights. EU Reg. Design:Â 008654792-0006 UK Reg. Design:Â 6148295
Evotech Rear Spindle Bobbins – Triumph Daytona 660 (2024+)
₹6,500.00
What is Spindle Bobbin Crash Protection?
Mounted through the rear wheel spindle and swing arm, the nylon bobbins and aluminium support of EP Rear Spindle Bobbins for the Triumph Daytona 660 offer secure crash protection. The bobbins project from both sides of the wheel, intending to take impact first, should an incident occur to, reduce expensive damage. The innovative design by Evotech Performance allows the nylon bobbins to rotate above the aluminium core which can reduce stress and wear placed on the wheel.
Evotech Rear Spindle Bobbins – Triumph Speed Triple 1200 RS (2025+)
₹9,000.00
What is Spindle Bobbin Crash Protection?
The Triumph Speed Triple RS single-sided rear swingarm hub is a target for expensive damage. Protect yours with the Evotech Rear Spindle Bobbins. The driveline side features a moulded nylon bobbin and aluminium spacer. The opposing side features a CNC-machined aluminium hub stop finished in striking red anodise to match the bike's styling accents. The protectors are held firmly via supplied stainless steel spindle and fasteners.
Evotech Triumph Daytona 660 Crash Protection (2024+)
₹38,500.00
Evotech Crash Protection for Triumph Daytona 660 (2024+) equips your bike with high-performance polymer sliders mounted on precision CNC-machined aluminum brackets. Designed to protect critical components and fairings during slides or tip-overs, it delivers robust impact reduction while preserving the Daytona’s sleek, sporty appearance.
Evotech Triumph Street Triple R Pillion Footpeg Removal Kit (2020-2022)
₹6,500.00
Evotech Pillion Footpeg Removal Kit for Triumph Street Triple R (2020–2022) enables clean removal of passenger footpegs and associated mounts. CNC-machined billet aluminum components ensure precise fit and lightweight durability, streamlining the bike’s rear profile for solo-rider styling while maintaining structural integrity.
Your One-Stop Destination for Premium Motorcycle Parts & Accessories
At MotoPit Garage, we bring you top-quality motorcycle parts, gear, and accessories tailored for every rider — from daily commuters to die-hard motorheads. Whether you're upgrading performance, replacing essentials, or customizing your bike, you'll find trusted brands, genuine products, and the latest styles in one place.
