The HealTech Exhaust Servo Eliminator is a plug-and-play solution that removes the exhaust servo motor on various BMW models, preventing error codes and improving exhaust flow. Compatible with a wide range of BMW R and S series motorcycles from 2004 to 2019, it's ideal for riders upgrading to aftermarket exhausts or removing the servo system.
₹9,000.00
Offering protection to the lower single-sided swing arm and sprocket carrier, EP Rear Spindle Bobbins for the Ducati Streetfighter V4 are easy to fit. The advanced design has an aluminium core with the nylon bobbin head above. The materials are independent, allowing the nylon to shift on impact aiming to reduce stress on the wheel. An attractive red hub stop secures the spindle rod on the exhaust side.
Description
Features of EP Rear Spindle Bobbins for the Ducati Streetfighter V4
- Protects the single-sided swing arm and sprocket carrier
- Injection-moulded nylon bobbin with an aluminium support
- Rolled-thread stainless steel spindle rod
- Anodised red hub stop for exhaust side
- Simple to install through the rear wheel spindle
- Replacement bobbin heads can be purchased separately
Shipping
Reviews (0)
Rated 0 out of 5
0 reviews
Rated 5 out of 5
0
Rated 4 out of 5
0
Rated 3 out of 5
0
Rated 2 out of 5
0
Rated 1 out of 5
0
Be the first to review “Evotech Rear Spindle Bobbins – Ducati Streetfighter V4 (2020 – 2024)” Cancel reply
Questions & Answers
Loading...
More Products
Evotech Radiator Guard – Triumph Tiger 900 (2020 – 2023)
₹14,900.00
What protection does an EP motorcycle radiator guard give?
An Evotech Radiator Guard protect the Triumph Tiger radiator system from damage caused by road and off-road debris, while allowing cooling air to pass through - and look good at the same time. A radiator's delicate cooling fins easily bend, and misaligned fins can cause overheating. The radiator's internal cooling galleries can also be holed by stones, which are usually picked up and flung directly into the radiator from the motorcycle's front tyre or passing traffic. Leaking coolant will make the Tiger 900 inoperable because of overheating, which can result in engine damage. This product is protected under the following registered design rights. EU Reg. Design: 008262380-0019 UK Reg. Design: 9008262380-0019Evotech Rear Spindle Bobbins – Ducati Streetfighter 848 (2012-2016)
₹8,000.00
Evotech Rear Spindle Bobbins for the Ducati Streetfighter 848 offer protection for the expensive swing arm and sprocket carrier. If the unfortunate occurs, the bobbin should take impact first. The advanced bobbin design allows the nylon outer to rotate above the aluminium core to reduce stress on the wheel. On the exhaust side, an attractive red-anodised hub stop secures the spindle rod in place.
Evotech Front Spindle Bobbins – Honda CB650R (2024+)
₹7,900.00
Using Evotech Performance's innovative design, EP Front Front Spindle Bobbins for the Honda CB650R offer crash protection to the lower front forks. The nylon bobbin is able to rotate with any impact to decrease stress and wear on the lower front end. Within the nylon is a strong aluminium core which fits to the front wheel via rolled thread stainless steel spindle. Finally, for the crash protectors to fit to the Honda Neo Sports Cafe, a replacement spindle bolt is provided with a through-hole for the spindle rod.
Product Enquiry
Product Enquiry
RELATED PRODUCTS
Evotech Aprilia RS660 Brake Lever Protector Kit (2021 – 2024) (Road)
₹17,000.00
Introducing the Ultimate Brake Lever Protector Kit for Your Aprilia RS660, exclusively designed and crafted by Evotech Performance!
Are you a proud owner of the powerful and agile Aprilia RS660? If so, we have the perfect accessory to elevate your safety and style - the Aprilia RS660 Brake Lever Protector Kit from the renowned experts at Evotech Performance!Evotech Bar End Weights (Road) – Aprilia RS4 125 (2011-2022)
₹10,700.00
Description
Features of Evotech Bar End Weights (Road) for the Aprilia RS4 125 Direct replacement for Aprilia’s left and right OE handlebar weights Stylish design with Evotech Performance logos and aesthetic Precise, simple installation with EP’s bespoke mounting design All stainless steel construction, including all fasteners Evotech’s signature durable power-coating for the Bar End Weights No alterations to motorcycle or Bar End Weights requiredEvotech Performance Bar End Weights (Race) For Aprilia 2024+
The Evotech Performance Bar End Weights (Race) PRN016052‑016302 for Aprilia 2024+ are compact, bolt-on stainless steel replacements designed to reduce handlebar vibrations while protecting the bar ends. With a sleek black powder-coated finish and easy installation using OEM hardware, they offer track-ready durability in a minimalist design
Evotech Performance Bar End Weights (Touring) For Aprilia 2024+
₹10,700.00
When fitting Evotech Bar End Weights, it is the rider’s responsibility to ensure the motorcycle’s throttle action (correct free-play, smooth opening and closing of the throttle, etc) is not impaired in any way. Evotech Bar End Weights are designed to be used only with the OE throttle tube and handlebar grip.
Evotech Performance Mirror Blanking Plates For Aprilia 2024+
₹6,000.00
The Evotech Performance Mirror Blanking Plates (PRN016761) for Aprilia (2024+) are CNC-machined aluminum plates finished in matte black to elegantly seal off stock mirror mounting points. They install using original fasteners—no modifications needed—keeping debris and weather out while maintaining a clean, streamlined fairing look.
Evotech Performance Radiator Guard For Aprilia 2024+
₹9,300.00
The Evotech Performance Radiator Guard (PRN017317) for the Aprilia RS 457 (2024+) is a precision-engineered, plug‑and‑play protection solution:
-
Lightweight aluminum construction offers strong defense without compromising airflow.
-
Hexagonal matrix design shields fragile radiator fins from stones and debris.
-
Follows the bike’s contours perfectly for a seamless OEM look.
-
Black powder-coated finish with all necessary fixings and anti‑vibration pads.
-
Designed for easy installation with no modifications required.
K&N High-Flow Original Lifetime Engine Air Filter – BMW F800, BM-8006
₹7,590.00
-
Designed specifically for BMW F800 (GS, R, ST)
-
Washable and reusable cotton gauze filter media
-
Increased airflow for enhanced engine performance
-
Durable construction with epoxy-coated mesh
-
Direct OEM replacement – no modification needed
-
Long service intervals (10,000–15,000 km)
-
Eco-friendly alternative to disposable filters
K&N High-Flow Original Lifetime Engine Air Filter – BMW R1150R, BM-0400
₹7,590.00
-
High-flow design boosts performance & airflow
-
Designed specifically for BMW R1150R (all model years)
-
Washable & reusable — lasts the lifetime of your bike
-
Superior filtration with multi-layer cotton gauze
-
Durable epoxy-coated steel mesh frame
-
Easy drop-in installation — no modifications required
-
Eco-friendly & cost-saving over time
K&N High-Flow Original Lifetime Engine Air Filter – BMW R1200/R1250
₹7,590.00
-
Custom-engineered for BMW R1200 & R1250 models
-
High-flow design for increased performance
-
Washable and reusable – lasts the life of your bike
-
Superior filtration efficiency protects your engine
-
Easy to install, no special tools needed
-
Eco-friendly and cost-effective alternative to disposable filters
K&N High-Flow Original Lifetime Engine Air Filter – BMW S1000RR
₹7,590.00
-
🏍️ Compatible with all BMW S1000RR model years
-
🌬️ Increased airflow for better performance & throttle response
-
🛡️ Superior filtration for maximum engine protection
-
🔁 Reusable and washable – lasts the lifetime of your motorcycle
-
🧰 Drop-in OEM fit – no modifications required
-
🌱 Eco-friendly and cost-saving over time
-
🏁 Ideal for both street and track use
K&N High-Flow Original Lifetime Engine Air Filter – DUCATI 1199 PANIGALE/ 1299 PANIGALE
₹5,990.00
-
Precision-fit high-flow air filter for Ducati 1199 & 1299 Panigale
-
Washable, reusable, and built for a lifetime of performance
-
Increases horsepower and throttle response
-
Made with premium synthetic media and stainless-steel mesh
-
Eco-friendly alternative to disposable filters
-
Perfect for road or track use
-
Easy drop-in installation — no tuning required
K&N High-Flow Original Lifetime Engine Air Filter – DUCATI 1199 PANIGALE/ 1299 PANIGALE
₹5,990.00
-
Precision-fit high-flow air filter for Ducati 1199 & 1299 Panigale
-
Washable, reusable, and built for a lifetime of performance
-
Increases horsepower and throttle response
-
Made with premium synthetic media and stainless-steel mesh
-
Eco-friendly alternative to disposable filters
-
Perfect for road or track use
-
Easy drop-in installation — no tuning required
Reviews
Clear filtersThere are no reviews yet.