₹6,900.00
Handguard Mount Kit
TO FIT:
6mm or 8mm internal thread handlebar
Code: STM-007-NP
Description
Description
- AUSTRALIAN MADE – “Aussie Made Aussie Tough”
- To fit 6mm or 8mm internal thread handlebar.
- Mounted to a single point on the handlebar end using a unique internal locking system.
- Incorporates an aluminium frame and locking cap to provide secure attachment.
- Easy installation.
- Hardware Kit only (NO plastic guards).
- Compatible with JET, VPS, STORM or CARBON guards (each sold separately).
- Note: some Triumph models have a 5mm internal thread which must be drilled and tapped to 6mm.
- Note: This Single Point Mount product is not designed for impact protection.
- (If impact protection is required, choose from our TWO POINT MOUNT options).
More Products
Evotech Front Spindle Bobbins – Suzuki V-Strom 800DE (2024+)
₹6,500.00
Fabricated from high quality engineering-grade materials, EP Front Spindle Bobbins can protect the lower forks and brake calipers of the Suzuki V-Strom 800DE. The nylon bobbin has an aluminium support and both are held in place by a stainless steel spindle rod. These protrude from both sides of the front wheel aiming to hold the motorbike away from harm. The nylon is able to rotate independently, reducing stress on the wheel and offering greater durability to the bobbin.
Quad Lock MAG Case-iphone15 plus
₹4,000.00
Evotech Radiator Guard – Triumph Tiger Sport 660 (2022+)
₹12,000.00
Why would a Triumph Tiger Sport 660 require a radiator guard?
Evotech radiator guards are designed to protect a motorcycle radiator from damage caused by road debris, while allowing essential cooling air to pass through. Regardless of engine capacity and overall performance, without a quality radiator guard in place the radiator cooling fins can get hammered and stone chippings, flung from the front tyre or passing traffic, can hole the radiator core. As a fragile and intricate component, the Tiger Sport 660 radiator is very difficult to repair (in most cases beyond economical repair) and expensive to replace. This product is protected under the following registered design rights. EU Reg. Design: 008934319-0002 UK Reg. Design: 6195550Eazi-Grip Kawasaki ZX10R/ZX10RR Black 2016-2025 Tank Grips
₹5,000.00
Please note Eazi-Grip™ tank grips come with a 25mm diameter Eazi-Grip™ logo badge that should be placed in the hole in the grip once applied (not applicable for PPF).
**Each kit contains tank grips or protection film for both the right and left side of the tank and will have a minimum of 2 pieces per kit that are specific to the bike model. Centre tank pads contain one tank pad per kit. Images are for illustrative purposes only, the tank grips may be larger/smaller than in the picture and are only designed to show the correct location of tank grips on the bike.**
RELATED PRODUCTS
Quad Lock 1” Ball Adaptor Mount V2
₹3,000.00
Quad Lock Handlebar Mount Pro Chrome
₹9,900.00
Quad Lock MAG Case-iphone16 Plus – 6.7
₹4,000.00
Quad Lock® MAG Case-iphone16 Plus Cases feature our secure locking mechanism compatible with all twist, lock mounts, impact resistant edge to edge cover, and protective lining.
PROTECTIVE / IMPACT RESISTANT
With a tough, polycarbonate core and impact absorbing TPU edge-to-edge outer shell, you can be confident that your iPhone will be protected every day.Quad Lock MAG Case-iphone16proMax-6.9
₹4,000.00
Quad Lock® MAG Case-iphone16proMax-6.9 Cases feature our secure locking mechanism compatible with all twist, lock mounts, impact resistant edge to edge cover, and protective lining.
PROTECTIVE / IMPACT RESISTANT
With a tough, polycarbonate core and impact absorbing TPU edge-to-edge outer shell, you can be confident that your iPhone will be protected every day.Quad Lock MAG Case-Samsung Galaxy S24
₹4,000.00
Quad Lock Motorcycle Fork Stem Mount Pro
₹8,800.00
Quad Lock Motorcycle USB Charger
₹3,900.00
Keep your phone charged while you ride with the Quad Lock® Motorcycle USB Charger.
EASY INSTALLATION
Seamlessly integrate the Motorcycle USB Charger with any Quad Lock® Motorcycle Mount or 1" Ball Adaptor. The Charger is neatly positioned under the Quad Lock® mount head to provide USB power without the need for long charging cables. The 1.5m SAE connection cable and 20cm SAE to battery ring terminals give you the option to connect directly to your Battery Terminal or existing SAE Port. The charger draws zero current when not in use so there is no danger of draining your battery.Quad Lock Phone Ring / Stand – V2
₹1,500.00
Quad Lock Universal Adapter V3
₹1,500.00
Quad Lock Window / Dash Car Mount V5
₹5,000.00